logo
Dispensing Valve
  Dispensing Valve: TH-100J , TH-200J , TH-300J , TH-400J , TH-600J , TH-700J , TH-800J, TH-1000J
     
Mrico dot valve
Features
  • Zero dead fluid volume.
  • Easy calibration, short setup time.
  • Consistent microdots as small as 0.18 mm (0.007”) diameter.
  • Unaffected by entrapped air in fluids.
  • Drip-free shutoff.
  • Compact and lightweight, space-saving installation.
  • Replaceable seals.

 

 

      TH-100J
 
     
 
Metering valve
Features
  • Suitable for all low to medium viscosity dispensing.
  • Positive shutoff displacement metering.
  • Flexible coupling from motor,Constant motor speed.
  • Without air pressure entering piston and dispensing.
  • Dispensing valve has a good appearance and easy to install.

 
      TH-200J
 
     
 
Pinch tube valve
Features
  • Throwaway valve and feed tubes.
  • Suitable for low viscosity fluids.
  • Ideal for two-part epoxies and cyanoacrylate.
  • Simple to use and maintain.
  • Delivers precise volumetric shot sizes.
  • Max material pressure of 60psi (4 bar).v
  • "On/Off" Control is achieved by pinching a molded Polyethylene tube assembly.

 
      TH-300J
 
     
  Auger screw Valve  
  Features  
 
  • Suitable for all medium to high viscosity dispensing.
  • Adjustable auger speed to Adjustable flow rate.
  • Brushless motor.
  • Fixed head version for lines and stripes.

 
      TH-400J
 
     
 
Poppet valve with suck-back
Features
  • Suck-back effect.
  • Seperated wetted parts.
  • Suitable for precision dispensing of many types of fluids, such as solvents, oils, silicones, glues, UV adhesives, inks, etc.

 

 

 
      TH-600J
 
     
 
Two component mix/meter valve
Features
  • The TH-700J Suck-back valve designed for precise flow control of Low viscosity To High viscosity liquid materials.
  • Have Vacuum suck-back, close speedy can ensures no dripping.
  • Middle place stroke adjustment to fine tune shot size.
  • Air cylinder and liquid cylinder Separated.
  • Can single point dispensing and continuous dispensing.
  • Easy cleaning, using life is long.
  • The amount dispensed depends on valve open time, fluid pressure, fluid viscosity, flow adjustment and tip size.

 

 

 
      TH-700J
 
     
 
Rotary valve
Features
  • Constant uniform bead dispensing.
  • Suitable for medium high viscosity fluids.
  • Close tolerance.

 

 

 
      TH-800J
 
     
 
Dual cartridge valve
Features
  • Using for Dual cartridges 50ml(1:1,2:1,4:1,10:1).
  • Piston retraction for easy loading and unloading.
  • Open/close very fast response and positive shutoff.
  • Operation is easy, replace the syringe is very convenient.

 

 

 
      TH-1000J
       HOMEPRODUCTSNEW PRODUCTSSUPPORT ABOUT USCONTACT USAPPLICATIONS
       ©2012-2017 TianHao Dispensing  浙ICP备08112974号    公安备案号:33028202000045