logo
Full Automatic Pre-applied Thread Sealant Equipment
 
Production Intruduction
Full automatic thread adhesive machine with feed system and product automatic load and unload. We as your customer require design the feed system and product load and unload device.
TH-2004L3-Z410(Custom)
Specifications  
ITEM TH-2004L3-Z410
Standard CE Approved
Length <120mm
ID Size M5-M30
Range no limit
Drive Precision step motor
Control way Micro Master
Input Air pressure >5 bar(1bar =1.01972kg/cm² =14.5038psi)
Input voltage 110/220VAC(Internal conversion)

Features

Applications

1. Table and uniform spiting, fast processing speed.
2. Reduce reject rate, defects, rework time and spot guiding.
3. Replace of screws gasket and sealing belt, and keep the thread from chemical corrosion.
4. Improve greatly resistance vibrations, high temperature, and anti-loose, and the rate of use and reuse the screw of pneumatic joint or others.
5. Add high precision liner rail on the load and unload material, Independent cylinder driving, greatly improve the stability.
6. Add springing advice above of dispensing nozzle, which prevents jumping tooth with screw if diameter precision is not high or screw ends tapered down slightly.
7. the thimble cylinder quote big cylinder which keeping the function of moving and regulating, more live up to different length products replacing operations.
8. Replace of screws gasket and sealing belt, and keep the thread from chemical corrosion.
9. Improve greatly resistance vibrations, high temperature, and anti-loose, and the rate of use and reuse the screw of pneumatic joint or others.
10. Set freely the alveolar amount, position and width of dispensing. Can adjust the start and end positions of adhesive gluing, any total or partial.
11. High precision position, fast speed, high efficiency and long use life; High quality, accurate and consistent to coating. For example, like 1mm thread, can finish a qualified product every 3 seconds.
12. Supply convenient user control screen. Intuitive operation parameters. Less than half a day, you can learn and operate. Low maintenance rate.
13. Compact body. And use the chamfer to attach part between machine and people, which can avoid injuring.
14. According to the production process need, can be configured a mass storage device,which can avoid changing the material frequently and save much time.




  • Screw
  • bolts
  • studs
  • bolt
  • nuts
  • wood screws
  • self tapping screws
  • washers
  • variety of pneumatic fittings
Related Products  
Fluid Reservoirs Tank with CE and ROSH
Dispensing nozzle
Dispensing Valve
 
       HOMEPRODUCTSNEW PRODUCTSSUPPORT ABOUT USCONTACT USAPPLICATIONS
       ©2012-2017 TianHao Dispensing  浙ICP备08112974号    公安备案号:33028202000045